Saturday, October 5, 2019

Health Care Spending Paper Essay Example | Topics and Well Written Essays - 1250 words

Health Care Spending Paper - Essay Example The current developments in health care spending indicate that this sector is slowly spiraling out of control. Policies are being put in place to try and address the problem before it completely gets out of hand. This paper will look at some of the aspects of health care spending, and how it is affecting different trends in the economy in the United States. Currently, health care spending has hit an all-time high. It is estimated that in the year 2013, the health care sector in the region used almost 3 trillion U.S. dollars, which is said to be over 15% of the region’s economy. Statistics also provide evidence that spending in this sector has been growing at a rate of at least 3 percent since the year 2009. Spending in the United States has doubled since the early 2000s, but the sluggish recovery of the economy is what may be making the rates much lower than anticipated (Yesalis, Politzer & Holt, 2012). Most of the people in the region are foregoing medical care as a result of a decline in their disposable income, increase in cost to workers, and even loss of health cover. It is my belief that the coming year, and the ones after that, may record a sharp rise in health care spending. It is my opinion that the figures projected by some of the organizations in the region are too high. This is a clear indication that almost a quarter of the region’s economy is spent on health care and other related health care costs, which means that the other sectors present are having to share most of what is left. The health care sector is just as important as any other sector that is present in the region. This means that proper policies must be put into account when coming up with estimates for the use and appropriation of capital into the health care sector. The amount of capital that is spent on medicine, as compared to other Organizations for Economic Co-operation and

Friday, October 4, 2019

The aim of the project is to find a Competitive inhibitor which will Essay

The aim of the project is to find a Competitive inhibitor which will inhibit the methylation of Protein phosphate 2A (PP2A) Via LCMT-1 - Essay Example This means that the methylation of PP2A may be an important regulatory mechanism on the condition that the PP2A methylation is tightly regulated. Tamanoi and Clarke (2006, p. 316) further presents that there are two main levels of regulation of the PP2A. This is may be achieved either through demethylating enzyme LCMT1 or PME-1 or the regulation at the C-terminal tail of PP2AC site (Tamanoi and Clarke, 2006, p. 316). Furthermore, they advance that the methylation of PP2A can also be regulated or deregulated by certain diseases(Sheng 2013). Seshacharyulu, Pandey, Datta and Batra (2013, p.9) elaborates that PP2A serves to regulate the function by dephosphorylating numerous important cellular molecules such as the p53 and Akt. The PP2A is significant in critical cellular processes including signal transduction, proliferation and apoptosis. PP2A is structurally multifarious made up of catalytic, support and regulatory subunits. The support and catalytic sub-units of the PP2A comprise of two major isoforms, whereas the regulatory sub-unit has four distinct families of different isoforms. Of these sub-units, the regulatory sub-unit is considered the most diverse in terms of spatial and temporal specificity. The PP2A usually undergoes certain post-translational changes such as methylation and phosphorylation that serve to regulate the enzymatic activity of PP2A. Certain somatic alterations, mutations and aberrant expression of the PP2A support and regulatory sub-units have been common in a variety of malignancies in humans including skin, breast and lung cancers. This demonstrates that the role of PP2A as a tumor suppressor (Seshacharyulu et.al 2013). A group of heterogeneous genes encode the individual subunits of the enzyme. This gives rise to a multitude of various PP2A holoenzyme complexes (Schà ¶nthal 2013, p.2). Some of the observations that PP2A puts certain stimulatory and

Thursday, October 3, 2019

Study Guide Questions for Fahrenheit 451 Essay Example for Free

Study Guide Questions for Fahrenheit 451 Essay Answer the following questions in paragraph form. These questions should act as a reading guide and are not intended to replace careful reading of the novels themes and development. Part I: The Hearth and the Salamander (pages 3-14) 1. What do the fireman do for a living? For a living the â€Å"fireman† burns books and occasionally some people, if they are with the book. It’s quite different that what firemen do today. 2. In the opening scene, why are the books compared to birds? In the opening scene, the books are refered to as flapping pigeon-winged books because the burning pages look as if they are wings of a bird flapping up and down. 3. What does Montag think of his job? Montag enjoys his job burning books and takes great pride in it. At the beginning of the novel, it largely defines his character. The opening passage describes the pleasure he experiences while burning books. He loves the spectacle of burning and seeing things â€Å"changed† by the fire. 4. Who does Montag meet on the way home? He meets his new neighbor, an inquisitive and unusual seventeen-year-old named Clarisse McClellan. She immediately recognizes him as a fireman and seems fascinated by him and his uniform. She explains that she is â€Å"crazy† and proceeds to suggest that the original duty of firemen was to extinguish fires rather than to light them. She asks him about his job and tells him that she comes from a strange family that does such peculiar things as talk to each other and walk places. Clarisse’s strangeness makes Guy nervous, and he laughs repeatedly and involuntarily. 5. During his conversation, Montag says that You never wash it off completely referring to the kerosene. What could this mean symbolically? This could mean that Montag always acts and thinks like a fireman, even when hes not working; that being a fireman affects the way you see the world. It could also mean that Montag doesnt want to wash off the smell completely, that he likes and is proud of it. 6. Speculate: Why do you think that Bradbury would introduce Clarisse before Montags wife, Mildred? I think that Bradbury introduces Clarisse before Mildred because of the impact she has on Montags way of thought and sense of being in the world. Even though she is his wife, Millie really has little bearing on causing change in Montag. She is representative of the Status Quo, the way things are. Yet, Clarisse is a voice, the first real and definitive voice that represents how things should be for Montag. She is the first voice to challenge him and compel him to think and reflect about how what he is doing needs to stop.

Developing a Sustained Drug Delivery System

Developing a Sustained Drug Delivery System 1. INTRODUCTION In last few years, Formulations that are able to extend the release of drug have become an integral part of Pharmaceutical research. It is a centre of exploration due to its many benefits over conventional dosage form. Sustained drug delivery system was aimed to release the medication in a prolonged rate. The basic concept of the sustained release dosage form development is to reduce the frequency of dosage administration, to reduce the fluctuations of drug in the plasma by maintain plasma drug level1 thus improves. Various expressions such as sustained-release ,controlled-release, prolonged-action and repeat action have also been used to describe.. Sustained release offers prolonged delivery of drugs and maintenain plasma levels within a therapeutic range, steady-state plasma levels can be maintained without oscillation2,3. The sustained level of the medication was obtained by controlling the plasma blood level and less frequent dosing4 (Lachman et al., 1987). 1.1 Matrix system is classified into 5 types based on Hydrophilic Matrix System and insoluble hydrophobic Inert Matrix system (6-8) 1.1.1 Hydrophobic Matrix tablet In this technique of sustained release from an oral dosage form the drug is mixed with an inert or hydrophobic polymer and then compressed into a tablet. The sustained release is obtained by dissolving drug and was diffused through a network of channels that exist between compacted polymer particles. The materials used as inert or hydrophobic matrices consist of polyvinyl chloride, polyethylene, and ethyl cellulose and ammonia methacrylate copolymers. The rate controlling phase in these formulations is the solvent penetration into the matrix. The possible mechanism of drug release in the hydrophobic matrix tablet was by diffusion. Hydrophobic matrix tablet consist of porous and nonporous matrix systems. 1.1.2 Hydrophilic matrix tablets The drug molecules are combined with the polymer and erode slowly in body fluids. Hydroxy propyl methyl cellulose is commonly used polymer in the hydrophilic matrix tablets.It is a simple method and widely accepted due to its desirable global regulatory acceptance, cost effective, flexibility in drug release profile matching and ease of commercial scale-up. The different grades of Hydroxypropylmethylcellulose were available for the design of sustained drug delivery system. The viscosity range of the Hydroxypropyl methylcellulose assist in the percentage release rate of drug release. The low viscosity range polymer cause increase in the drug release. The hydrophilic matrix system the mechanism of drug release occurs mainly by diffusion and erosion. In the hydrophilic matrix system the use of cellulosic polymer cause gel formation on the surface of polymer and cause tablet erosion with continuous release of drug. The polymers commonly used in the hydrophilic matrixes are classified into three categories. Cellulose derivatives- hydroxyethylcellulose, Methylcellulose, Hydroxy propylmethylcellulose grades like K4M, K100M, 5cPs, 15cPs and Sodium carboxymethylcellulose. Semi synthetic polymers- Modified starches, Alginates and Chitosan. Acrylic acid Polymers -Carbopol 934 1.1.3. Wax matrix tablets The drugs are embedded into lipid matrix by spray congealing in air and Wax-matrix tablet core consisting of semi-synthetic glycerides and blend congealing in an aqueous media. The congealing process use with or without the aid of surfactants, the wax matrix components are prepared from the blend of powdered ingredients. 1.1.4. Gum type matrix tablets In this type of matrix system the excipients produce gel like consistency in presence of water and the dispersion of the active drug of the tablet was maintained by gel barrier. For example xanthan gum and sodium alginate in water soluble polysaccharides used in gum type matrix systems. appropriate method depends on the properties of the drug, polymer and selection of other ingredients. Many statistical experiments are useful tool to develop sustained release formulation with an optimized formulation with an appropriate dissolution rate with a minimum number of trials. For this reason, a computer based optimization technique with a response surface methodology (RSM) utilizing a polynomial equation and artificial neural network (ANN) has been widely used (Ghosh et al., 2008andBozic et al., 1997). 2.0  KINETICS OF DRUG RELEASE Various mathematical models utilized to interpret the mechanism of the drug release from ER dosage form, with the available dissolution data these release kinetics can be calculated using the model that best fit is selected based on the correlation coefficient (r) value in various models, which gives higher ‘r’ value is considered as the best fit of the release data. The following are the various Release kinetics Cumulative percentage drug released Vs time (In-Vitro drug release plots) Cumulative percentage drug released Vs Square root of time (Higuchi’s plots) Log cumulative percentage drug remaining Vs Time (First order plots) Log cumulative percentage drug released Vs log time (Peppas plots) Calculated regression coefficients for zero order, first order, Higuchi and Korsmeyer-Peppas. The best fit model with the highest correlation coefficient. Table No. 3. Analysis of diffusion release mechanisms Release exponent (n) Overall solute diffusion mechanism 0.5 Fickian diffusion 0.5 Non-Fickian diffusion 1.0 Case II transport n > 1.0 Super Case II transport Zero order release is calculated from the following equation Qt = Q0 + K0 t where Q0 = initial amount of drug Qt = cumulative amount of drug release at time â€Å"t† K0 = zero order release constant t = time in hours It describes the systems where the drug release rate is independent of its concentration of the dissolved substance. The first order release equation is calculated from the following equation Log Qt = Log Q0+ Kt /2.303 where Q0 = initial amount of drug Qt = cumulative amount of drug release at time â€Å"t† K = first order release constant t = time in hours Here, the drug release rate depends on its concentration The Hixson Crowell release is calculated from the following equation is Where Q0 = Initial amount of drug Qt = Cumulative amount of drug release at time â€Å"t† KHC = Hixson crowell release constant t = Time in hours. It describes the drug releases by dissolution and with the changes in surface area and diameter of the particles or tablets A linear plot of the cube root of the initial concentration minus the cube root of percent remaining versus time in hours for the dissolution data in accordance with the Hixson-crowell equation. The Higuchi release is calculated from the following equation Q=KHt1/2 where Q = cumulative amount of drug release at time â€Å"t† KH = Higuchi constant t = time in hours The Higuchi equation suggests that the drug release by diffusion. A graph is plotted between the square root of time taken on x-axis and the cumulative percentage of drug release on y-axis and it gives a straight line. Korsmeyer – peppas equation is F = (Mt /M ) = Kmtn Where F = Fraction of drug released at time ‘t’ Mt = Amount of drug released at time ‘t’ M = Total amount of drug in dosage form Km = Kinetic constant n = Diffusion or release exponent t = Time in hours An optimal experimental formulation was compared with the original product, in order to compare the profile of the in vitro release of the drug. 3.0  BIOAVAILABILITY STUDY: Stabilitytesting of Drug products conducted as per ICH conditions the formulations which are stable up to 6M 40 °C/75% RH and 25 °C/60% considered as stable formula taken up for in vivo absorption study. In current scenario in vitro and in vivo performance of the dosage forms is essential part of Product development. The FDA guidelines respecting the IVIVC method evaluation used to set dissolution specifications; which can be applied for surrogate for in vivo bioequivalence for certain pre- or post approval changes, such as Equipment, facility or Manufacturing process changes and minimizes the bioavailability or bioequivalence study after the formulation design optimization The ultimate aim of IVIVC is to select the suitable dissolution method of in vivo absorption of the test compound. In IR tablets the release is more rapid in ER, the excipients also having bio pharmaceutical activity and controls the release within the body. Generally HPMC matrices are biocompatible and do not have enzyme degradation by gastric fluids. For Biovailability study the following Pharmacokinetic parameters to be studied they are Tmax, Cmax and AUC can be evaluated via Plasma or Urine data. Pharmacokinetic assessment the plasma drug concentrations determined by HPLC analysis. Drug extracted from plasma sample by liquid-liquid extraction method, To study the rate and extent of absorption of Cilostazol and Etodolac extended release matrix tablets 100 with that of 100 mg reference(R) conventional marketed formulations and IR tablets The research study was performed in rabbit model to evaluate the pharmacokinetics and then for IVIVC studies. The simple HPLC method used to evaluate to determine the drug content in plasma, the in-vitro studies shows the release pattern is slow first order, For Cilostazol the overall Cmax, Tmax, AUC0-t, Kel and T1/2 were completely different between both test and reference formulation (IR). Therefore the prepared formulation was releasing the drug for a prolonged period of time In case of Etodolac the Cmax, Tmax, AUC0-t, Kel and T1/2 were completely comparable with the reference product; therefore the prepared formulation was releasing the drug for a prolonged period of time and bioequivalent with reference product.

Wednesday, October 2, 2019

Negative Outcomes from Portrayal of Young Women in the Media Essay

When one thinks of media, one tends to relate media to television, news, magazines, newspaper articles, and so on. Many people do not think of media is something that portrays negative effects on young women. However, young women are more susceptible to lower self-esteem resulting in eating disorders or depression more today than ever before. The media projects negative and undermining images of women and one does not have to look very hard to realize this. The media projects images of unrealistic women who only look the way they do because of plastic surgery or airbrushing techniques. The media has much greater effects on young girls than anything else in our culture today. Our society has created an environment so obsessed with image that those who have the power give disapproval for being overweight, and give approval for being thin. This has created a generation of women so self conscious about their body that it starts to affect their health in many different ways. Where Portrayal Starts On average, boys and girls spend anywhere from two to six hours a day being exposed to television, the internet, magazine articles, video games, and so on. (4) This is a massive amount of time spent over the years viewing media. With time, all the advertisements become normal to us and we tend to accept what is being shown on the television. Some of this is perfectly fine. Watching televison, researching the internet, and magazine articles help one receive information. Although much of this information is a learning opportunity, many do not take the time to consider the negative affects media does have. Over time one starts to see repetitive advertisements and start to tune them out, which then we adapt to this, and it b... ...d how they really are in a positive way. Final Thoughts The outcome of how media effects young teenage girls is a grave concern that keeps growing. Campaigns and advertisements that put pressures on these young girls to be thin are continuously growing. These constant pressures to be thin and beautiful are drawing them away from being themselves. Girls are now starting to resort to harmful eating habits and body dissatisfaction at a young age. These unhealthy habits will start to ruin our young women, and will take an ultimate toll on our future. Women are beautiful the way they are. Our society does not need to take away from the happiness that one has by using computer imaging to bring one down. In a perfect world everyone would look the same and have the same beauty, but it is not a perfect world, which then makes everyone beautiful in their own way.

Tuesday, October 1, 2019

Ancient Greek Medicine Essay -- Greek History

Ancient Greek Medicine While Greek Medicine particularly from the 5th century B.C onwards, increasingly used scientific method to develop cures, there still however remained people that considered medicine to be a religion. The ancient Greeks (Hellenic) made important discoveries about the human body and health, so by the sixth century BC, medicinal practices focused largely on a more clinical approach involving observation. Their discoveries were made by firstly studying the human anatomy using dissection and vivisection, finding ways to heal using things such as plants and herbs, then finally practising surgery on the human body using different instruments. Before the scientific method developed, most people still saw medicine as a religion, and believed that superstitions, evil spirits and punishments caused illness from the gods. The best-known ancient Greek physician Hippocrates, made several important medical discoveries in Ancient Greece. He was born on the island of Cos, living from 460 B.C. - 377 B.C., and is revered as the 'Father of Medicine'. He was the first man to make medicine a profession and to see medicine as a science and not a religion. Hippocrates devised an oath, which every new doctor still swears to this day. Hippocrates and his followers looked at the cause of the disease rather than the symptoms. Hippocrates saw that diseases came from natural causes; he discovered that thought came from the brain and not from the heart, and he saw that the body needed to be treated as a whole and not just a series of parts. The theory of the four humours originated from the works of Aristotle. The idea of Humours is usually credited to Claudius Galen, a Greek physician of the second century A.D. But although he organized the idea more accessibly, he was probably not its creator. Centuries earlier, in the fourth century B.C., Hippocrates wrote of the bodily humours in his Hippocratic Corpus. The physician believed that the body was made up of four components or â€Å"four humours†. The four components are: Blood formed at the heart – Spring – Air, Phlegm in the brain – Winter – Water, Yellow Bile in the liver – Summer – Fire and Black Bile in the spleen – Autumn – Earth. Hippocrates argued that when these four fluids were out of balance disease occurred. The ideal place for a good balance of humours was (naturally) found in the centre of Greek ... ...that the strigil, a curved piece of metal with a handle used for scraping oil and sweat off the body after exercise was often used to get into small openings, so as Galen said, â€Å"After having heated the fat of a squirrel in a strigil, insert it into the auditory canal.† The invention of these instruments meant they improved as new shapes were devised. Gradually new metals and alloys were found to provide sharper edges and cheaper equipment. Most instruments were made of bronze and occasionally silver. Iron was never used as it was forbidden by the Greeks and so never used on religious grounds. Some instruments were manufactured by specialist blade makers who specialized in medical instruments rather than by an ordinary craftsman. The Romans employed many Greek physicians and through them the Greeks discoveries in medicine gradually spread throughout the ancient world. Greece was a country that gave birth to some of the most important medical pioneers in human history. Through Continuous studies, they changed people from seeing medicine as a religion. Their study of disease and the human body to the scientific method has resulted in the advanced medical knowledge we have today.

An Analysis and Study of Information Systems with Their Related Terms and Concepts

â€Å"An analysis and study of Information systems with their related terms and concepts† Deepak Sharma Research Scholar ,Mewar university Rajasthan Mob. 9639916009 E-mail: [email  protected] com Abhishek Singh Bhatanagar Student MCA, Subharti University Meerut Mob. 9897008522 E-mail: [email  protected] com Abstract: This paper is written as a weapon to know about information systems in depth. As tomorrow's managers, entrepreneurs, or business specialists, business students need to know how to use and manage information technology in today's networked enterprises and global markets.In this dynamic environment, they will rely on interconnected networks of information systems for end user collaboration, including communications and computing among end user work groups and teams, and enterprise wide computing, including communications and information processing for business operations, managerial decision making, and strategic advantage. So this paper is a great assets in kno wing about information system in brief. Keywords: information, system ,management ,DSS ,TPS etc. 1. Introduction:An Information System is any combination of information technology and people's activities using that technology to support operations, management, and decision-making. In a very broad sense, the term information system is frequently used to refer to the interaction between people, algorithmic processes, data and technology. The focus of Info Systems is on the development of solutions for business problems rather than simply describing them. 1. 1 Functions (benefits) of information Systems: 1. It helps in increasing employee productivity. . It Help users to become information’s competent, that means find it easy to organise their information, search for information, analyze their information and using old information to create new information. 3. For providing better support to managers for effective decision making. 4. Information systems strongly focus on explain ing empirical phenomena of the real world. [pic] †¢ 1. 2 Categories of Information system: 1. Transaction Processing Systems (TPS) 2. Decision Support Systems (DSS) 3. Expert Information Systems (EIS) . Management Information Systems (MIS 5. Office Automation Systems (OAS) 1. 2. 1 Transaction Processing System: It processes business transaction of the organization. A Transaction Processing System or Transaction Processing Monitor is a set of information which process the data transaction in database system that monitors transaction programs Transaction can be any activity of the organization. Transactions differ from organization to organization. For example, take a railway reservation system .Transaction processing systems provide speed and accuracy, and can be programmed to follow routines functions of the organization 1. 2. 2Decision Support Systems (DSS): Decision Support Systems (DSS) are a specific class of computerized information system that supports business and organi zational decision-making activities. A properly designed DSS is an interactive software-based system intended to help decision makers compile useful information from raw data, documents, personal knowledge, and/or business models to identify and solve problems and make decisions.Typical information that a decision support application might gather and present would be: †¢ Accessing all of your current information assets, including legacy and relational data sources, cubes, data warehouses, and data marts †¢ Comparative sales figures between one week and the next †¢ Projected revenue figures based on new product sales assumptions †¢ The consequences of different decision alternatives, given past experience in a context that is described 1. 23 Expert information systemAn expert information system with which a decision maker in the construction, or a related industry, can generate a decision record and related control instructions in a facile manner without significa nt omissions while ensuring that substantially all of the options available for making the decisions have been considered. The expert system includes a microcomputer which executes a system control program to select information units from the expertise of a data base and to concentrate individual information units until an entire decision record has been generated.The process is enhanced by a multiwindowed display which displays possible selections from the expert data base while contrasting that data with data in another window having a list of data indicating the decisions or selections already made. A display pointer with a controllable position is employed to select lines and phrases of the expert information from that portion of the data base displayed in the selection window. The selection of such information causes the line or phrase from the data base, an information unit, to be transferred to the decision record and to the display of the selected decisions window. . 2. 4 Ma nagement information system (MIS) It is the organized approach to the study of information needs of a management at every level in making operational, tactical, and strategic decisions. Its objective is to design and implement man-machine procedures, processes, and routines that provide suitably detailed reports in an accurate, consistent, and timely manner. Modern, computerized systems continuously gather relevant data, both from inside and outside the organization.This data is then processed, integrated, and stored in a centralized database (or data warehouse) where it is constantly updated and made available to all who have the authority to access it, in a form that suits their purpose. 1. 2. 5 Office automation system Office automation systems (OAS) are configurations of networked computer hardware and software. A variety of office automation systems are now applied to business and communication functions that used to be performed manually or in multiple locations of a company, such as preparing written communications and strategic planning.In addition, functions that once required coordinating the expertise of outside specialists in typesetting, printing, or electronic recording can now be integrated into the everyday work of an organization, saving both time and money. 2. Information systems for Business operations: Business operations are those ongoing recurring activities involved in the running of a business for the purpose of producing value for the stakeholders. They are contrasted with project management, and consist of processes.The outcome of business operations is the harvesting of value from assets of a business. Assets can be physical or intangible. An example of value derived from a physical asset like a building is rent. An example of value derived from an intangible asset like an idea is a royalty. The effort involved in â€Å"harvesting† this value is what constitutes business operations. Information technology plays a major role in reengineering business processes.The speed, information processing power, and ease-of-use of modern computer hardware, software, and networks can dramatically increase the efficiency of business processes, and communications and collaboration among the people responsible for their operation and management. IT is a strategic requirement for agile product development and delivery. Information systems provide the information people need to support agile operations, as well as the information built into products and services 2. 1 Information system for strategic advantage:Information systems can be used to implement a variety of competitive strategies. These include the five basic competitive strategies (differentiation, cost, innovation, growth, alliance), as well as other ways that companies can use information systems strategically to gain a competitive edge. For example: 1. Lower Costs 2. Differentiate 3. Innovate 4. Promote Growth 5. Develop Alliances 6. Improve quality and effici ency Conclusion: So finally we can conclude that information system is a greatest tool by which our organization can take more and more liberties in future to achieve their goals.It increases the accuracy and reliability of information that is much needed by today’s organizations. References: 1. â€Å"Definition of Application Landscape†. Software Engineering for Business Information Systems (sebis). Jan 21, 2009. Retrieved January 14, 2011. 2. O'Brien, J A. (2003). Introduction to information systems: essentials for the e-business enterprise. McGraw-Hill, Boston, MA 3. Alter, S. The Work System Method: Connecting People, Processes, and IT for Business Results. Works System Press, CA 4. www. google. com 5. www. sciencedaily. com 6. www. wikipedia. com [pic][pic][pic]